GET A FREE QUOTE
We look forward to speaking with you soon!
C2 Series
Outdoor Compact Access Control and Versatile Time & Attendance Devices
C2 Series (C2 Pro, C2 Slim, C2 KA and C2 SR) is a biometric identification and RFID card access control & time attendance based on Anviz's advanced technology. With the mullion-mount, keypad design, and IP65 dust & waterproof, the C2 Series can be installed in various environments and outdoor installation, turnstiles etc. It provides installers with lower installation and maintenance costs by supporting PoE. C2 Series also supports dual-frequency (125kHz/13.56MHz) cards with the multi-smartcard reader, HID iClass & Prox cards and communications with smartphones to access the door. C2 Pro with fingerprint scanner, RFID reader and personal PIN offer versatile punching options, plus CrossChex Cloud time attendance software support, super easy time tracking which provides hassle-free workforce management.
Where to Buy
We'll connect you with a partner in your area
Sistemas Integrales De Automatizacion, S.A. De C.V.
Mexico
siasa.com
clizama@siasa.com
(999) 930 2575
-
IP65 Dust & Water Proof
-
Multi-Smartcard Reader
-
Mobile Access
-
PoE Easy Installation
-
Mullion-type Design
Multi-Smartcard Reader
Support 125kHz and 13.56MHz RFID including MIFARE, MIFARE Plus, DESFire, MIFARE Ultralight, FeliCa and EM, HID iClass & Prox. NFC will be introduced in the future.
Mullion-type Design
Mount easily with a small access control terminal that can easily be installed on a door frame.
IP65 Dust & Water Proof
C2 Series access control terminals are designed to be used indoor and outdoor applications coupled with IP65 ingress protection.
PoE Easy Installation
Support power sourcing over Ethernet cable compliance to IEEE802.3af standard, to provide users with lower installation cost, simpler cabling, and lower maintenance cost.
Applications
C2 Series can be used as a turnstile integrated management system composed of computers, fingerprint identification technology, intelligent pedestrian turnstile gate, smart card, access control, and time attendance management software.
Further, C2 Series has been regarded as a top physical and logical access control system to solve the security concern of enterprises.
Using CrossChex Cloud as a time attendance software to automatically generate a timesheet to track the time a particular employee has worked during a certain period.
Due to fingerprint scanner like C2 Pro supports the both biometric identification and biometric authentication, it is an established solution that is being used in time attendance management.
When it comes to choosing a reliable commercial door entry with smartphone mobile, C2 Series is always a better investment.
RFID door lock system combined with biometric readers of C2 Series enhanced door security, especially for high-security applications such as in medical, financial, or government facilities.
Configuration
Specification
| Model Name | C2 SR | C2 KA | C2 Slim | C2 Pro | |
|---|---|---|---|---|---|
|
|
|
|
||
| General | Identification Mode | Card | Card, Password | Finger, Card | Finger, Password, Card |
| RFID Options | 125kHz EM & 13.56MHz MIFARE | 125kHz EM & 13.56MHz MIFARE | 125kHz EM & 13.56MHz MIFARE, HID iClass & Prox (HID Version) |
125kHz EM & 13.56MHz MIFARE, HID iClass & Prox (HID Version) |
|
| Capacity | Max. Users | — | 10,000 | 3,000 | 10,000 |
| Max. Cards | — | 10,000 | 3,000 | 10,000 | |
| Max. Logs | — | 100,000 | 50,000 | 100,000 | |
| Function | Time Attendance Mode | — | — | — | 8 |
| Group, Time Zone | — | 16 groups, 32 time zones | 16 groups, 32 time zones | 16 groups, 32 time zones | |
| Work Code | — | — | — | 6 digits | |
| Short Message | — | — | — | 50 | |
| Web Sever | — | √ | √ | √ | |
| Record Auto Inquiry | — | — | — | √ | |
| Daylight Saving | — | √ | √ | √ | |
| Voice Prompt | — | Voice | Voice | Voice | |
| Multiple Language | — | √ | √ | √ | |
| Software | — | CrossChex Standard | CrossChex Standard | CrossChex Standard & CrossChex Cloud | |
| Mobile | — | √ | √ | — | |
| Hardware | CPU | 32-bit Processor | 1.0 GHz Processor | 1.0 GHz Processor | Dual-core 1.0 GHz Processor |
| Fingerprint Sensor | — | — | AFOS Touch Active Sensor | AFOS Touch Active Sensor | |
| Finger Scanning Area | — | — | 22mmx18mm (0.87x0.71") | 22mmx18mm (0.87x0.71") | |
| Display | — | — | — | 3.5" TFT | |
| Keypad | — | Physical Button | — | Physical Button | |
| Dimensions(W x H x D) | 50x159x25mm (1.97x6.26x0.98" | 50x159x25mm (1.97x6.26x0.98") | 50x159x32mm (1.97x6.26x1.26") | 140x190x32mm (5.51x7.48x1.26") | |
| Working Temperature | -10°C~60°C (14°F~140°F) | -10°C~60°C (14°F~140°F) | -10°C~60°C (14°F~140°F) | -10°C~60°C (14°F~140°F) | |
| Humidity | 20% to 90% | 20% to 90% | 20% to 90% | 0% to 90% | |
| PoE | — | IEEE802.3af | IEEE802.3af | IEEE802.3af | |
| Power Input | DC12V | DC12V | DC12V | DC12V | |
| IP Grade | IP65 | IP65 | IP65 | — | |
| I/O | TCP/IP | — | √ | √ | √ |
| RS485 | √ | √ | √ | — | |
| USB Host | — | — | — | √ | |
| Wi-Fi | — | √ | √ | √ | |
| Bluetooth | — | √ | √ | — | |
| Relay | — | √ | √ | √ | |
| I/O | — | Door Contact/ Exit Button | Door Contact/ Exit Button | Exit Button | |
| Tamper Alarm | — | √ | √ | — | |
| Wiegand | Output | Input & Output | Input & Output | Output | |
Download
-
04/29/2022V1.0C2 Series Brochure EN2.06 MB
-
04/29/2022V1.0C2 KA Product Images18.5 MB
-
04/29/2022V1.0C2 Pro/ C2 Pro HID Product Images8.6 MB
-
04/29/2022V1.0C2 Slim/ C2 Slim HID Product Images12.9 MB
-
04/29/2022V1.0C2 SR Product Images10.2 MB
Related Faq
-
Contents
Part 1. CrossChex Connection Guide
1) Connection Via the TCP/ IP model
2) Two ways to remove the admin permissionPart 2. Reset Anviz Devices Admin Password
1) Connected to the CrossChex but the admin password is lost
2) The device communication & admin password are lost
3) The keypad is locked, and communication and admin password are lost
Part 1: CrossChex Connection Guide
Step 1: Connection via the TCP/IP model. Run the CrossChex, and click the 'Add' button, then the 'Search' button. All available devices will be listed below. Choose the device that you want to connect to the CrossChex and press the 'Add' button.
Step 2: Test if the device is connected to the CrossChex.
Click the 'Synchronize time' to test and make sure the device and CrossChex are connected successfully.
2) Two methods to clear the administrator's permission.
Step 3.1.1
Select user/s that you want to cancel administrator permission, and double click the user, then change 'administrator' (the administrator will display in red font) to 'Normal user'.
CrossChex -> User -> Select one user -> change Administrator -> Normal user
Choose 'Normal user', then click the 'Save' button. It will remove the user's admin permission and set it as a normal user.
Step 3.1.2
Click 'Set Privilege', and choose the group, then click the 'OK' button.
Step 3.2.1: Back up the users and records.
Step 3.2.2: Initialize the Anviz Device (********Warning! All Data Will Be Removed! **********)
Click 'Device Parameter' then 'Initialize the device, and click 'OK'
Part 2: Reset Aniviz devices admin password
Situation 1: Anviz device is connected to the CrossChex but the admin password is forgotten.
CrossChex -> Device -> Device Parameter -> Management password -> OK
Situation 2: The device's communication & admin password are unknown
Input '000015' and press 'OK'. A few random numbers will pop up on the screen. For security reasons, please send those numbers and the device serial number to the Anviz support team (support@anviz.com). We will provide technical support after receiving the numbers. (Please DO NOT turn off or restart the device before we provide technical support.)
Situation 3: The keypad is locked, communication and admin password are lost
Input 'In' 12345 'Out' and press 'OK'. It will unlock the keypad. Then follow the steps as Situation 2.
-
Contents:
Part 1. Firmware Updates Via Web Server
1) Normal Update (video)
2) Forced Update (video)
Part 2. Firmware Updates Via CrossChex (video)
Part 3. Firmware Updates Via Flash Drive
1) Normal Update (video)
2) Forced Update (video)
.
Part 1. Firmware Update Via Web Server
1) Normal Update
>> Step 1: Connect Anviz device to PC via TCP/ IP or Wi-Fi. (How to connect to CrossChex)
>> Step 2: Run a browser (Google Chrome is recommended). In this example, the device is set in the server mode and IP address as 192.168.0.218.
>> Step 3. Enter 192.168.0.218 (Your device might be different, check the device IP and enter IP address) in the browser address bar to run as the webserver mode.
>> Step 4. Then enter your user account, and password. (default User: admin, Password: 12345)
>> Step 5. Choose 'Advance Setting'
>> Step 6: Click 'Firmware Upgrade', choose a firmware file that you want to update and then click 'Upgrade'. Wait for the updating complete.
>> Step 7. Update Complete.
>> Step 8. Check the firmware version. (You can check current version either on webserver info page or on the device info page)
2) Forced Update
>> Step 1. Follow the steps above till steps 4, and enter 192.168.0.218/up.html or 192.168.0.218/index.html#/up in the browser.
>> Step 2. Forced Firmware Upgrade mode is set successfully.
>> Step 3. Operate Step 5 - Step 6 to finish the forced firmware updates.
Part 2: How To Update Firmware Via CrossChex
>> Step 1: Connect the Anviz device to the CrossChex.
>> Step 2: Run the CrossChex and click the 'Device' menu on the top. You will be able to see a small blue icon if the device has connected to the CrossChex successfully.
>> Step 3. Right-click the blue icon, and then click the 'Update Firmware'.
>> Step 4. Choose the firmware that you want to update.
>> Step 5. Firmware update process.
>> Step 6. Firmware Update Complete.
>> Step 7. Click the 'Device' -> Right-Click the blue icon -> 'Device Information' to check the firmware version.
Part 3: How To Update The Anviz Device Via Flash Drive.
1) Normal update mode
Recommended Flash Drive Requirement:
1. Empty Flash Drive, or place firmware files in the Flash Drive root path.
2. FAT file system (Right-click USB Drive and click 'Properties' to check the Flash Drive file system.)
3. Memory Size under 8GB.>> Step 1: Plug a flash drive (with an update firmware file) into the Anviz Device.
You will see a small Flash Drive icon on the device screen.
>> Step 2. Login with Admin mode to the device -> and then 'Setting'
>> Step 3. Click 'Update' -> then 'OK'.
>> Step 4. It will ask you to restart, press 'Yes(OK)' to restart once to complete the update.
>> Done
2) Force update mode
(****** Sometimes devices are not allowed to be updated, this is because of device protection policy. You can use force update mode when this situation occurs. *****)
>> Step 1. Follow the Flash Drive Update from step 1 - 2.
>> Step 2. Click 'Update' to get into the page like showing in the below.
>> Step 3. Press 'IN12345OUT' in the keypad, then the device will change to forced upgrade mode.
>> Step 4. Click 'OK', and the device will restart once to complete the update.
>> Step 5. Update Complete.
Related News
Related Download
- Brochure 2.4 MB
-
Anviz_C2Pro_Catalogue_EN_08.29.2016
08/16/2019
2.4 MB
- Manual 6.8 MB
-
Anviz_C2Pro_QuickGuide_EN_05.09.2016
03/01/2019
6.8 MB
- Brochure 5.3 MB
-
Anviz_C2Slim_Catalogue_EN_05.08.2019
07/07/2023
5.3 MB
- Manual 1.2 MB
-
Anviz_C2Slim_QuickGuide_EN_8.28.2018
08/28/2018
1.2 MB
- Brochure 13.2 MB
-
2022_Access Control & Time and Attendance Solutions_En(Single page)
02/18/2022
13.2 MB
- Brochure 13.0 MB
-
2022_Access Control & Time and Attendance Solutions_En(Spread format)
02/18/2022
13.0 MB
- Manual 7.7 MB
-
C2pro User Manual
06/28/2022
7.7 MB
- Manual 4.9 MB
-
C2 KA User Manual
04/12/2023
4.9 MB
.png)