-
VP30
RFID damar sarrafawa
Ikon samun damar katin VP30 da halartan lokaci shine tsarin kula da damar samun ƙwararrun ƙwararrun ƙwararrun ƴan kasuwa masu girma zuwa matsakaici don tsaro. Yana haɗaka RFID, ƙararrawar ɓarna, kasancewar lokaci da ayyukan sarrafawa da sauransu, tare da gaye da kyawawan bayyanar da ingantaccen inganci. Yana da babban buzzer na kiɗa, nunin yare da yawa, ƙirar abokantaka na mai amfani da aikin sadarwa mai ƙarfi wanda ya dace da sarrafa bayanai a wurare daban-daban. Ya zo tare da software na sarrafa bayanan aiki, masu dacewa da nau'ikan bayanai daban-daban. Yana goyan bayan yankin lokaci da ikon samun damar ƙungiya don babban matakin tsaro. Yana da m, dace da Multi-aiki.
-
Features
-
Harsuna da yawa da suka haɗa da Ingilishi, Faransanci, Sifen, Fotigal da Sinanci da sauransu.
-
Farin faifan maɓalli na baya mai maɓallan lamba 10 da maɓallan ayyuka 7
-
Daidaitaccen mai karanta katin RFID, mai karanta katin Mifare na zaɓi
-
RS485, na'urar USB da TCP/IP don haɗin cibiyar sadarwa
-
Fitar ƙararrawa tamper don haɗawa da kayan ƙararrawa a waje
-
Ana iya aika katin ƙararrawa No. zuwa mai sarrafawa ta Wiegand 26
-
Ikon kulle kai tsaye don buɗe kofa
-
Zaɓin SC011 ko kowane daidaitaccen mai sarrafa damar shiga don nau'in keɓantaccen tsarin kula da samun dama
-
Yankin lokaci da ikon samun damar ƙungiya, saka idanu na canja wurin bayanai na ainihin lokaci
-
Hanyar ganewa: Kati, Kalmar wucewa
-
Daidaitaccen masu amfani da katin 20000 da rikodin 200000
-
Fuskar bangon bango, haɗa aikin 2-in-1 don ikon samun dama da halartan lokaci
-
-
Ƙayyadaddun bayanai
Capacity Ingerarfin Yatsa 2,000 (VF30)
Ƙarfin Kati 2,000 (VF30) 20,000 (VP30)
Caparfin Shiga 50,000 (VF30) 200,000 (VP30)
Bayani Mai Sadarwar Sadarwa RS485, Mini USB Bawan, PoE-TCP/IP, Wiegand In/OutI
Relay DC 12V, Relay Output (COM, NO, NC)
Feature Yanayin Ganewa (VF30) FP, Katin, PW
Yanayin Ganewa (VP30) Katin, PW
Yanayin kunnawa Ku taɓa
Lokacin tantancewa <0.5 seconds
Yankin dubawa 22mm * 18mm
katin Reader Daidaitaccen Katin EM, Mifare Na zaɓi
Nunin Hoton Sawun yatsa A
Matsayin da aka ayyana kansa 16 Canjin lokaci da matsayin halarta
Lambar aiki 6- lambobi aiki cod
Gajeren Sako 50
Bell da aka tsara 30
Soft Anviz Crosschex Standard
Hardware LCD 128*64 farin LCD
Ƙofa Buɗe Sensor A
Girma (WxHxD) 80x180x40mm(3.15x7.1x1.6″)
Zafin jiki -30 ℃ ~ 60 ℃
Perararrawa Tamper A
Operating awon karfin wuta DC 12V
-
Aikace-aikace
.png)
Zazzagewa mai alaƙa
- Brochure 13.2 MB
-
2022_Ikon Samun dama & Lokaci da Halartar Magani_En(Shafi ɗaya)
02/18/2022
13.2 MB
- Brochure 13.0 MB
-
2022_Ikon Samun dama & Lokaci da Halartar Magani_En(Tsarin Yaɗa)
02/18/2022
13.0 MB
- manual 2.7 MB
-
Anviz_VP30_QuickGuide_EN_12.19.2013
07/05/2018
2.7 MB
- Brochure 1.2 MB
-
Anviz_VP30_Catalogue_EN_12.19.2013
07/05/2018
1.2 MB
Faq mai alaƙa
-
Bidiyo don haɓaka Firmware na na'urar mara allo
Umarni
Bidiyo don na'ura mai haɓaka Firmware na allo
Mataki 1) Samun Kayan Aikin Haɓaka Firmware (Download A nan)
Haɗa na'urar zuwa PC tare da RJ11 zuwa kebul na USB or Mini kebul na USB.
Mataki 2) Samu izini (Na zaɓi)
Bayan haɗi, goge katin gudanarwa (Katin rajista ko Katin Share) a cikin daƙiƙa 10.
AGASKIYA ! Wannan matakin don sikirin da ba LCD ba ne kawain model!
Mataki 3) Tabbatar cewa an haɗa na'urar cikin nasara
Za ku ga sabon gunkin direban diski yana faruwa a cikin mai sarrafa fayil ɗin windows ɗin ku.
Mataki 4) Haɓakawa a cikin PC ɗin ku
4.1 Gudun Kayan Aikin Haɓaka Firmware.
4.2 Sabunta zuwa sabuwar sigar Firmware
-- Danna "Browser" don nemo Firmware daidai (* .bin fayil).
-- Danna "Upgrade" don fara haɓakawa, wannan tsari na iya ɗaukar 'yan dakiku.
4.3 Yanzu kun sami sigar firmware ta ƙarshe.
Da fatan za a tuntube mu (support@anviz.com) idan kuna da wata matsala.
Thanks!
Anviz Ƙungiyar Tallafi ta Kasa
2020-04-16 -
Contents
Kashi na 1. Anviz CrossChex Jagorar Haɗi
1) Haɗin kai ta hanyar Mini USB
2) Hanyoyi Biyu Don Cire Izinin Admin
Sashe na 2. Sake saiti Anviz Password Admin Devices
1) Sake saita Anviz Password Admin Devices
.
Kashi na 1.
1) Mataki 1.1: Haɗa ta mini USB. (Tsalle zuwa Mataki na 1.2 idan kuna amfani da samfurin TCP/IP)
CrossChex -> Na'ura -> Ƙara -> Shigar da '0' azaman ID na na'ura -> Ƙara
2) Mataki 1.2: Haɗi ta hanyar samfurin TCP/IP.
Danna maɓallin 'Ƙara' sannan kuma maɓallin 'Search'. Duk na'urorin da ake da su za a jera su a ƙasa. Zaɓi na'ura ɗaya da kake son haɗawa da ita CrossChex, kuma danna maɓallin 'Ƙara'.
Mataki 2: Gwada idan an haɗa na'urar zuwa CrossChex.
Danna 'lokacin aiki tare' don gwada idan na'urar/s da CrossChex an haɗa su cikin nasara.
3) Akwai hanyoyi guda biyu don cire izinin admin.
Mataki 3.1.1:
Zaɓi mai amfani/s ɗin da kuke son cire izinin gudanarwa. Danna mai amfani sau biyu don buɗe Ƙara/gyara shafin Bayanin mai amfani, sannan canza 'mai gudanarwa' (mai gudanarwa yana nunawa a cikin rubutun ja) zuwa 'mai amfani na yau da kullun'.
CrossChex -> Mai amfani -> Zaɓi mai amfani ɗaya -> canza Mai gudanarwa -> Mai amfani na yau da kullun
Zaɓi 'Mai amfani na al'ada', sannan danna maɓallin 'Ajiye'. Zai cire izinin admin na mai amfani kuma ya saita shi azaman mai amfani na yau da kullun.
Mataki 3.1.2:
Danna 'Set Privilege', zaɓi rukunin, sannan danna maɓallin 'Ok'.
Mataki 3.2.1: Ajiye mai amfani da rikodin.
Mataki 3.2.2: Fara da Anviz Na'ura (*******Gargadi! Za'a Cire Duk Bayanai*****)
Danna bayanin na'ura, danna farawa na'urar, sannan danna 'Ok'
part 2
1) Sake saitawa Anviz na'urorin admin kalmar sirri.
Run CrossChex -> Na'ura -> Sigar Na'ura -> Kalmar wucewar sarrafawa -> Ok
